4W 40K/50K RGB Laser Light

Description:

RGB laser spot, divergence angle: divergence angle: <1.5mrad, the diameter of the spot at the exit is <5mm.
The laser adopts analog modulation technology to linearly control the brightness of the laser, and the color is bright.
Using LCD graphic display, SD program storage, pattern size, voice control sensitivity, color setting, galvanometer speed, and pattern mirror can be controlled.
 Control mode: PC control (ILDA RJ45), DMX512 (18CH 25CH), voice control, automatic, master-slave synchronization, RGB, white light setting selection function.
Computer interface: Compatible with ILDA standard computer laser show software control. The full signal of ILDA is converted by electronic switch.
Safety configuration: laser single-point shutter protection device (with on/off options, high-power laser single-point protection is extremely important protection measures), laser key switch, laser emergency remote control interface, eyebolt.
Safety and intelligence: If the scanning motor or control system fails, the single-point shutter protection device is forced to block the light. The PC control and the built-in program mode are automatically recognized and switched; the light will be automatically turned off when there is no signal in the self-connection master-slave synchronization, DMX and PC control modes.
Power supply: 100~250V, 50/60HZ, 100W
Green Laser: Power: >1000mW; Wavelength: 520nm
Exit spot: 4*5mm; Divergence angle: <1.5mrad
Red Laser: Power: >1000mW; Wavelength: 638nm
Exit spot: 3*4mm; divergence angle: <1.5mrad
Blue Laser: Power: >2000mW; Wavelength: 450nm
Exit spot: 3*4mm; divergence angle: <1.5mrad
Scanning head: 40KPPS, ±30°