10W 40K RGB Laser Light

Description:

RGB laser spot, divergence angle: divergence angle: <1.5mrad, the diameter of the spot at the exit is <5mm.
The laser adopts analog modulation technology to linearly control the brightness of the laser, and the color is bright.
Control Mode:
AL10RGB: Built-in color screen controller, ILDA input and output, DMX512, automatic, voice control, master-slave mode.
Computer interface: Compatible with ILDA standard computer laser show software control. The full signal of ILDA is converted by electronic switch.
Safety configuration: laser single point protection, laser key switch, laser emergency remote control interface, eye bolt.
Safety and intelligence: The failure of the scanning motor or control system causes a single point, and the light is forced to be closed. The PC control and the built-in program mode are automatically recognized and switched; the light will be automatically turned off when there is no signal in the self-connection master-slave synchronization, DMX and PC control modes.
Power supply: 100~250V, 50/60HZ, 100W
Red Laser: Power: 3000mW, Wavelength: 638nm, Exit Spot: 4*5mm, Divergence Angle: <1.5mrad
Green Laser: Power: 3000mW; Wavelength: 520nm
Exit spot: 4*5mm; Divergence angle: <1.5mrad
Blue Laser: Power: 4000mW; Wavelength: 450nm
Exit spot: 4*5mm; Divergence angle: <1.5mrad
Scanning head: 40KPPS ±30°